"Biobased Lubricants that Perform Like Synthetics"

Bio Motor Oils, ATF, Gear

Bio-E.P. Gear Oils (ISO 46, 68, 100, 150, 220, 320, 460)

Bio-E.P. Gear™ Oils are designed to meet and exceeds the U.S. Steel 224, AGMA 9005/250.04, DIN 51517, Part 3, David Brown DB S1.53.101, and Cincinnati Machine E.P. performance requirements.  Bio-E.P. Gear™ Oils are recommended for lubricating spur, helical, bevel, and worm gear configurations which are subject to heavy loading or shock loading and are designed for heavy-duty applications.  The formulas have combined energy conserving Stabilized HOBS technology with synthetic base stocks and mild E.P./antiwear additives.  The result is an ultimately biodegradable product which has the long life heat stability but which additionally offers the protection advantages of increased gear life through extremely high film strength during operating temperatures.  Bio-E.P. Gear™ Oils are ENVIRONMENTALLY RESPONSIBLE lubricants that are formulated from renewable agricultural plant resources.  We believe Earth’s environmental future rests in the use of renewable material.

Features               (1) Energy Conserving Formulas  (Because of the super high viscosity index (VI) of the Stabilized HOBS these products are lighter therefore more energy efficient at room temperatures up to 40 C but provide a more protective heavier viscosity than mineral based formulas at operating temperatures of 60 C and above)

(2) Super high viscosity index provides wider temperature performance

(3) Fortified with additives to resist wear, oxidation, rust and foam

(4) More fire resistant and improved heat dissipation  

Bio-80W90 Gear Oils GL-4

Bio-E.P.™ 80W90 Gear Oil is designed to meet the GL-4 requirements of spiral bevel transmission and moderate service hypoid gears. This formula has combined Stabilized HOBS technology with synthetic base stocks and mild EP/antiwear additives.  The result is an ultimately biodegradable  product which has the long life heat stability but which additionally offers the protection advantages of increased gear life through extremely high film strength and excellent low temperature performance.  Bio-E.P. ™ 80W90 Gear Oil is an ENVIRONMENTALLY RESPONSIBLE lubricant that is formulated from renewable agricultural plant resources.  We believe Earth’s environmental future rests in the use of renewable material.

Bio-Gearhead Oil (SAE 10W30 SAE 15W40)

A Gearhead is the laymen’s language for the right angle gear drive commonly used to reduce the speed of an irrigation engine to drive water well turbine pumps.  These gear sets do not require Hypoid level of EP and because of this, the lubricant most commonly specified by makers of these gear reducers is an R & O or GL-3 type circulating oil in SAE 30 or higher viscosity.  This formula has combined Stabilized technology with HOBS and mild EP/antiwear additives.  The result is an ultimately biodegradable  product which has the long life heat stability but which additionally offers the protection advantages of the mild EP and antiwear  of an API "GL-3" type gear lube. 

Features              (1) API Service Classifications GL-1, GL-2, GL-3

     (2) Super high viscosity index and low pour point for wide temperature usage

Bio-E.P. Press Oils (ISO 46, 68, 100, 150, 220)

Bio-E.P. Press™ Oils are designed to meet and exceeds the demanding gear and bearing requirements in printing press systems.  These biobased lubricants are formulated with a unique additive system that provides a tackifier for anti-leak and/or non-drip performance.  In addition, the lubricants contain no chlorine, active sulfur, or heavy metals such as zinc which is important in press applications.  Bio-E.P. Press™ Oils are recommended for lubricating spur, helical, bevel, and worm gear configurations which are subject to heavy loading or shock loading and are designed for heavy-duty applications.  The formulas have combined energy conserving Stabilized HOBS technology with synthetic base stocks and mild E.P./antiwear additives.  The result is an ultimately biodegradable¹ product which has the long life heat stability but which additionally offers the protection advantages of increased gear life through extremely high film strength during operating temperatures.  Bio-E.P. Press™ Oils are ENVIRONMENTALLY RESPONSIBLE lubricants that are formulated from renewable agricultural plant resources.  We believe Earth’s environmental future rests in the use of renewable material.

Features              (1) Energy Conserving Formulas  (Because of the super high viscosity index (VI) of the Stabilized HOBS these products are lighter therefore more energy efficient at room temperatures up to 40^OC but provide a more protective heavier viscosity than mineral based formulas at operating temperatures of 60^OC and above)

(2) Super high viscosity index provides wider temperature performance

(3) Fortified with additives to resist wear, oxidation, rust and foam

Bio-Spindle Oils (ISO 22)

Bio-Spindle™ Oil is an ultimate biodegradable vegetable based formula that replaces many mineral oil based spindle oils.  Bio-Spindle™ Oil is formulated to perform in high speed, lightly loaded bearings that require both Anti-Wear, Rust, and Oxidation properties.  It is highly inhibited against moisture and rusting in both fresh and sea water and passes both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test.  Incorporating the super high viscosity index of the Stabilized High Oleic Base Stocks (HOBS) into the formula, gives multi-grade synthetic based oil performance by boosting the viscosity index to synthetic levels.  Bio-Spindle Oil™ is designed to meet or exceed the ISO standard FC-22.  A zinc-free additive system has also been developed that is environmentally friendly and meets the Anti-Wear requirements for high speed spindle bearings.  Bio-Spindle Oil is an ENVIRONMENTALLY RESPONSIBLE product that is formulated from renewable agricultural plant resources.

Bio-Air Compressor Fluid (SAE 30)

Bio-Air Compressor^TM Fluid is an ultimately biodegradable biobased/synthetic formula that replaces hydrocarbon oil based compressor fluids.  The super high viscosity index of the HOBS is combined with a biobased synthetic ester that improves the thermal shear stability of the formula and increases load capacity.  The HOBS’s extremely low volatility increases the flash and fire safety features in the formula.  Bio-Air Compressor biobase fluid should be used where low temperature properties, improved oxidation stability, excellent anti-wear performance, low toxicity, and BIODEGRADABILITY properties are required. 

Bio-Air Tool Lubricants (ISO 22, 32)

Bio-Air Tool™ Lubricants are specially formulated, ultimately biodegradable¹ air tool lubricants designed to replace petroleum based air tool oils.  Because of the super high viscosity index of the HOBS, these biobased products perform in many applications.  In addition, these products emulsify water for improved lubricity in moist conditions and provide anti-misting.  The natural oily film of these products have shown in laboratory and field tests to out perform petroleum base oils in terms of natural lubricity.  These air tool oils provide excellent lubrication for both rotary and reciprocating types of air tools, such as chipping hammers, impact wrenches, air motors, grinders, reamers, drills, etc.  They can be fed through an airline lubricator or by a squirt can directly into the tool through the quick coupling air connection.  These products have exceptional benefits over petroleum oils in these applications because there is direct danger of polluting the air, water, soil, or work environment through loss of the lubricant.

Bio-Drip Oils (SAE 10W20, SAE 10W30)

Bio-Drip™ Oils are fully formulated ultimately biodegradable vegetable based high performance turbine oils.  Bio-Drip™ Oils are recommended for use in drip lubrication systems for water well line shaft bearings, irrigation systems, etc.  Performance is enhanced by use of the Stabilized HOBS’s natural composition, which provides an oily boundary film.  The super high viscosity index of the Stabilized HOBS adds additional lubrication qualities to this high performance lubricant.

These products should always be used whenever there is a danger of soil or water pollution.  The best applications for these products are in the agricultural, construction, forestry, mining and marine industries.

Bio-Vacuum Pump Oil (SAE 10W30)

Bio-Vacuum Pump™ Oil is an ultimately biodegradable vegetable oil formula that is recommended in the dairy industry for automatic milking machines and most other vacuum pump applications.  Can also be used as an AW hydraulic fluid and it contains rust, corrosion, oxidation and foam inhibitors. Performance is enhanced by use of the Stabilized HOBS’s natural composition, which provides an oily boundary film.  The super high viscosity index of the Stabilized HOBS adds additional lubrication qualities to this high performance lubricant.

Bio-Slide Way Lubricant (ISO 32, 68, 220)

Bio-Slide Way™ Lubricants are specially formulated biodegradable, biobased products developed for the lubrication of machine tools and slides.  They eliminate stick-slip or table chatter by reducing friction between mating surfaces.  Where ways are heavily loaded they provide super high film strength and excellent EP protection.

Bio-Slide Way™ Lubricants formulations have metal wetting and adhesion properties that enable them to form uniform films that resist squeezing from way surfaces while machine is not in operation.  By preventing stick-slip, the wear of way surfaces is minimized and their service life is greatly extended.

Bio-Slide Way™ 32 Lubricant is generally recommended for dual purpose hydraulic and way lubrication service.

All contents copyrighted 2008, Renewable Lubricants ^TM, Inc.

Patented Products: US Patent 5,736,493, US Patent 5,863,872, US Patent 5,990,055, US Patent 6,383,992, US Patent 6,534,454,  US Patent 6,624,124, US Patent 6,620,772 with additional Pending and Foreign Patents

All rights reserved