Because of the super high viscosity index of the Stabilized* HOBS, this product performs in many applications.  BPL™’s patented composition of additives and base fluids provides a protective, thin film lubricant.  This natural oily film has shown in laboratory and field tests to out perform petroleum base oils in terms of natural lubricity. 

 Bio-Penetrating Lubricant Food Grade is formulated to penetrate into close tolerant areas, then lubricate, and prevent corrosion. Bio-Penetrating Lubricant’s ability to creep is demonstrated by placing a 3/8” x 2” bolt on its head with ¼” of Bio-Penetrating Lubricant in the bottom of a lab beaker; Bio-Penetrating Lubricant creeps vertically up the threads.  It protects deep into the core of a cable or chain link and is excellent as a light air tool lubricant and preservative oil for parts.  This Biobased product has exceptional benefits over petroleum oils in these applications because there is direct danger of polluting the water, soil, or work environment through loss of the lubricant.  Bio-Penetrating Lubricantcontains no volatile organic compounds (VOCs).

Technical Data Sheet	MSDS for Aerosol	NSF Form for Aerosol

	MSDS	NSF Form

It provides unbelievable cleaning ability when applied to the grimy baked-on, excessive oily build-up of the oven chains in food processing equipment. This highly concentrated industrial product is great for cleaning and lifting cooked on oils, grease, fats and foods off of ovens, stoves, and grills. In addition, it replaces petroleum solvents for degreasing and cleaning shops, parts, and equipment in many industrial applications. It cuts time and costs from your most difficult cleaning applications and is safe for ferrous and non-ferrous metals. This synthetic non-caustic cleaner does not contain Phosphates, Petroleum Distillates, Chlorinated Hydrocarbons or chemicals subject to the reporting requirements of SARA Title III. This is an Environmentally Friendly Green Product.

Highly inhibited against moisture and rusting in both fresh and sea water and pass both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test.  Incorporating the super high viscosity index of the Stabilized* High Oleic Base Stocks (HOBS) into the formula, increases the viscosity index past synthetic levels (Energy Conserving Formulas).  They can be used in environmentally sensitive areas such as in agriculture, marine, and food possessing plants. 

Bio-Food Grade™ Hydraulic  Fluids are designed for use in vane, piston, and gear-type pumps and have shown to have excellent anti-wear performance in ASTM D-4172.  The anti-wear performance meets and exceeds the requirements for Vickers M-2950-S (35VQ-25) and I-286-S (V-104C), Rexroth, US Steel 126, 136, and 127, and DIN 51524 Part 2.  They also meet the requirements for ashless GL-1 and GL-2 gear oils in reduction units and gear sets.  (Use Viscosity Sufficient For OEM Application)

Technical Data Sheet	MSDS	NSF Form ISO 32

		NSF Form ISO 46

		NSF Form ISO 68

		NSF Form ISO 100

Bio-Food Grade™ HT Anti Seize Compound provides excellent anti-rust, anti-oxidation, and antiwear
protection and is non- staining to aluminum and yellow metals. In addition, it provides for good low
temperature mobility and excellent resistance to water. It contains no heavy metals, lead, antimony, zinc, or
chlorine. Bio-Food Grade™ HT Anti-Seize Compound is an ENVIRONMENTALLY RESPONSIBLE product that
is formulated from biodegradable and renewable agricultural plant resources. We believe Earth's environmental
future rests in the use of renewable materials. This safe, nonflammable, biobased product contains no hazardous
Volatile Organic Compounds (VOCs) and EPA, OSHA, and Workers Acceptance is high with Biobased Products.

Application: Food Manufacturing – Military – Industrial – Transportation – Marine – Agricultural – Mining

Bio-Food Grade™ HT Anti-Seize Compound is specifically designed to provide high anti-weld protection and
withstand high pressures in sliding surfaces. It protects the shoulder and threads of bolts and pipes against damage from galling or seizure. Other applications including: tool joints, chains, cables, slideways, fifth wheels, king pins, chassis, hinge pins, studs, packing glands, gaskets, valves, pump shafts, screw shafts, or in slow moving rollers and bearings of high temperature ovens. In addition, Bio-Food GradeTM HT Anti-Seize Compound is recommended for high temperature oven chains and rollers where this white graphite film has been known to perform at extreme high temperatures for kiln support rollers and bearings. This white graphite has shown to provide improved lubrication after black graphite, PTFE, and molybdenum disulfide lose their lubrication between 400ºC and 500ºC.

Technical Data Sheet

MSDS

This biobased product is acceptable for use as a Release Agent (3H) on grills, ovens, loaf pans, boning benches, chopping boards, canning lids, knife cutting and honing oil, or other hard surfaces in contact with meat, fish, and poultry food products to prevent food from adhering during processing.  In addition, it performs as a protective anti-rust film, as a release agent on gaskets or seals of tank closures, and as a general purpose lubricant in applications where there is a very high possibility of the lubricant coming into direct contact with food products.  It has excellent oxidative stability and high biodegradability and can be used in environmentally sensitive areas such as in agriculture, marine, and food processing plants.  

Applications With Incidental Food Contact In and Around Food Processing Equipment Areas:

Drip oilers, air-oilers, air-tools, water pumps, bearings, machine oil, roller chains, cables, small electric motors bearings, light circulating oil, etc., and general lubrication.  This product may also be used in light reduction units where original equipment manufacturers require an ISO 32 or 46 R&O lubricant.  

These gear sets do not require Hypoid level of EP and because of this the lubricants most commonly specified by makers of these gear reducers are R&O or GL-3 type circulating oils.  ISO Viscosity Grades 32, 46, 68, and 220 meet and exceeds “Military Specifications DOD-L-24651 Lubricating Oils, Food Grade, and Food Processing Equipment.”  This specification is approved for use by the Departments and Agencies of the U.S. Department of Defense.  ISO Viscosity Grades 32, 46 and 68 meet DOD-L-24651 Type I and ISO Viscosity Grade 220 Meet DOD-L-24651 Type II for general purpose and gear oil lubricants.  This specification also requires a rating of USDA H-1 for incidental food contact. 

RLI’s patented formulas have improved performance over conventional products in terms of oxidation, thermal shear, and fluid film (viscosity index).  This super high viscosity index allows these products to be energy conserving in the startup mode and provide improved load protection, reducing wear during operation.  They are highly inhibited against moisture and rusting in both fresh and sea water and passes both A and B Sequences of the ASTM D-665 Turbine Oil Rust Test.  These products also provide double the oxidation stability over the US Steel 127 test requirement of 125 minutes and shows excellent performance in ASTM D-1401 Turbine Oil Demulsibility with a rating of 40/40/0 in ten minutes. 

 

RLI’s Bio-Food Grade™ Gear Oils have combined Stabilized technology with HOBS and food grade mild EP/anti-wear additives that exceed the load stage 10 in the FZG (DIN51354) requirements for both turbine oils and reduction gears.  The results are patented Food Grade1 products which have long life and heat stability.  Additionally, they offer the protection advantages of the mild EP and antiwear of an API "GL-3" type gear lube. 

RLI Heavy Synthetic Food Grade (H1) Grease provides excellent extreme pressure and antiwear protection and can be used over a wide range of operating temperatures. This product provides excellent lubrication in heavy loaded/ slower moving bearings were a 220 cSt base oil gives additional protection. Please contact Renewable Lubricants for MSDS.

Bio-Food Grade™ Air Tool Lubricant is designed to be commonly used in food processing equipment as it is essentially odorless and tasteless.  Because of the super high viscosity index of the HOBS, this biobased product performs in many applications.  The natural oily film of this product has shown in laboratory and field tests to out perform petroleum base oils in terms of natural lubricity. 

This air tool oil provides excellent lubrication for both rotary and reciprocating types of air tools, such as chipping hammers, impact wrenches, air motors, grinders, reamers, drills, etc.  It can be fed through an airline lubricator or by a squirt can directly into the tool through the quick coupling air connection.  Bio-Air Tool™ Lubricant can be very effective on the lift cylinders of can fillers in breweries, bottling plants and canning plants.  This product has exceptional benefits over petroleum oils in these applications because there is direct danger of polluting the air, water, soil, or work environment through loss of the lubricant.

Bio-Food Grade™ GP Lubricants provide excellent compatibility with many types of rubber, general purpose elastomers, and other materials they may be in contact with.  These oils provide short term corrosion protection for metal parts and they are non-staining to aluminum and yellow metals.  Their natural oiliness provides excellent lubricity in equipment that does not require anti-wear and E.P. additives.

 

Applications:  Drip oilers, air-oilers, air-tools, water pumps, bearings, machine oil, roller chains, cables, light circulating oil, etc., and general lubrication.  These products may also be used in light reduction units where original equipment manufactures require an R&O lubricant.

 

Base oils and additives in this product are listed in 21 CFR 178.3570, Lubricants for incidental food contact (USDA H-1).  Full compliance with other applicable restrictions of FDA, USDA, oil spill, and oil pollution prevention statutes is recommended.  

May also be used on other non-ferrous metal alloys.  Performance is enhanced by use of the natural fatty acid composition which provides cutting tool wetting and oiliness.  The product provides low odor and is non-staining to aluminum and yellow metals. Bio-Aluminum™ Cutting Oil is formulated without regulated volatile organic compounds (VOCs) and EPA, OSHA, and worker acceptance is high with biobased products.  Components in this formulation are not regulated as volatile organic compounds (VOCs) by the California Air Resources (CARB).

Bio-Extreme™ High Temperature Oven Lubricants are unique biobased food grade lubricants fortified with synthetic food grade white graphite. 

---

Bio-High Temperature Oven Lubricants ISO 68, 100, 150, 220 (USDA H1)

Bio-High Temperature (Biobased) Oven Lubricants are a unique biodegradable synthetic lubricant designed to lubricate bearings, chains, slides, and gears in industrial applications where air temperatures often exceed 500ºF. 

---

Bio-Food Grade E.P. Grease NLGI #0, #1, #2 (High Temperature) H1

Bio-Food Grade™ E.P. Greases are high temperature Biobased greases with excellent E.P. and Antiwear performance.