Additive composition, viscosities, and surface tension of the BCI™ products can be modified for special customers’ needs.  In many applications, the surface tension and viscosity specifications are duplicated to petroleum products with less volatile biobased oils/biobased solvents that provide a more fire resistant biobased product.  The additive composition and surface tension of the products can be modified for use in penetrating applications, wire rope, chain and cable lubricants, metal working, fabricating, assembly oils, forming oils, mold release, quench oils, heat transfer oils, slushing oils, acid fume rust preventatives, corrosion inhibiting preservative formulas, etc. to protect ferrous and nonferrous metals.  The BCI™ formulas can also be more volatile, allowing biobased carrier(s) to dissipate, leaving corrosion inhibitors and/or anti-wear-extreme pressure additives to remain on the surface of the metal parts, preventing wear and corrosion.  

 With BVCI™ products, ultra thin, highly protective films can be applied.  Film thickness of 0.02 mils or less have been tested in the ASTM D-1748 Humidity Cabinet on polished cold rolled steel panels and test results from 20 to 60 days before failure are typical for these ultra-thin films.  The volatile corrosion inhibitor formulas can be used to carry corrosion inhibitors into the air, releasing the corrosion inhibiting compounds on metal surfaces, preventing corrosion.  This is highly effective when added to packaging or sealed containers where the corrosion inhibition can remain as a volatile corrosion inhibitor for a longer period, protecting metal parts.  The formula allows the corrosion inhibitors to penetrate into close tolerance areas, preventing corrosion which allows for easier cleaning and/or paint preparation. 

 Adjusting these formulas to the application will prevent unnecessary waste, energy, and added expenses.  Most of these products can be applied by dipping, spraying, or brushing. 

Provides protection on ferrous and non-ferrous metals and is non-staining.  Excellent as a wire rope lubricant, preservative lubricant, etc. on sheet steel and steel parts and is more fire resistant than mineral base formulas with the same viscosity.  Also, excellent on copper corrosion test (Passed Clean 1A).

It is non-staining and water displacing and is also effective on galvanized steel.   In addition to corrosion protection, this product is a non-chlorinated metal working fluid that provides extreme pressure, anti-wear, and lubricity performance in heavy duty stamping and drawing applications.  This is an excellent BCI™ product that can be used in many industrial and commercial applications where corrosion inhibiting, waxy films are beneficial.

Ultra thin, highly protective films can be applied easily by dipping, spraying, or brushing.  These ultra thin films are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity.  When BVCI™s are agitated vigorously with water or alkaline solutions, the water will separate completely and rapidly.  (ASTM D-445 2 cSt to 7 cSt viscosity range- Non Flammable Flash Points).

Bio-ConcreteTM  Mold Release (Low Viscosity General Purpose):  A general purpose, lower cost product that is effctice as a mold release or parting compound for cast concrete products.

 

Bio-ConcreteTM  Mold Release Fluid (Modified): Additive composition, surface tension, and viscosities of the Concrete Mold Release Fluid can be modified for special customer needs..

These ultimate biodegradable products provide low odor and are highly accepted where additive free neutral base oils and material compatibility are desired.  They have been Stabilized to resist oxidation and provide excellent light color stability.  They are aromatic, chlorine, and sulfur free..